At the outer rim joist perpendicular to the main deck boards, measure 4 ¾ inches from the edge and place a chalk line or laser level.
Use a circular saw with a fine carbide blade and set the depth to ⅞ inches. Cut the main boards along the chalk line, creating a clean line to place the picture frame board.
Using a single-grooved board, cut to length with a 45 degree angle at corner.
On the outer rim joist parallel with the main boards, slide the single-grooved deck board securely into place. If using Step-Clip for Kebony, ensure the step-clip strip is properly engaged in the groove of the board.
Screw down the outer edge of the board at each joist location using #8 Stainless Steel screws or the Pro Plug System for Kebony. When face-fastening, always pre-drill.
Cut the perpendicular frame board to length including the 45 degree angle and fasten using #8 Stainless Steel screws or the Pro Plug System for Kebony. When face-fastening, always pre-drill.
Vi använder cookies på vår webbplats för att ge dig den mest relevanta upplevelsen genom att komma ihåg dina preferenser och upprepade besök. Genom att klicka på "Acceptera alla" samtycker du till användningen av ALLA cookies. Du kan dock besöka "Cookie Settings" för att ge ett kontrollerat samtycke.